PolyCom Stabilising Aid Cutting Edge Pavement Stabilisation: Australia

PolyCom Stabilising Aid the cutting edge alternative.

The root cause of most roadway failures is poor drainage, drainage, drainage. Experience has shown that if water passes through a road and fills the natve soil, the road whatever its thickness, loses support and goes to pieces”.
(John MacAdam 1820)

By adopting this simple advice, we'll be much closer towards the goal of better longer lasting roads and pavements. Generally, time tested and proven road stabilisation is carried out using lime or cement stabilisation. These additives have worked well for many years, although there has always been some niggling issues such as: cracking, shrinkage, rocking of stabilised areas (projects ending up non flexible or brittle) and OHS issues when handling cement and lime. Environmentally, cement or lime may not be the best choice either as they both require large amounts of water. They both however have their place and are valuable tools in the industry. The alternative is using PolyCom Stabilising Aid which is non toxic polymer based binder/stabiliser proudly made and supplied in Australia.

The advantages of using PolyCom Stabilising Aid:

  • A single pack will treat 50m2 of compacted road material

  • Field proven over 16 years

  • 1000 times less PolyCom is required than cement or lime at 2% mix design to achieve similar results

  • Flexible pavement created with high (strength) CBR values, not rigid or brittle  

  • No block cracking

  • No OHS or environment issues | Non Toxic

  • No requirement for costly machinery, bulk tankers or heavy lifting of bags

  • 50% less water requirement = time saved carting and placing water

  • Easy spreading with a small hand held spreader or 12v device fixed to a work ute or car determined by size of project

  • Support provided over the phone as required at no cost

  • Recyclable packaging that is easy and clean to handle

  • No time limit on workability and can be re worked at any time as required

  • Works in all kinds of materials like clay, sandy clay, crushed rock and pit gravels, reclaimed asphalt and more

  • Can be sealed immediately and takes a seal well with better adhesion properties

  • No special mix designs or complex lab testng required to get results

  • Reduce on-going maintenance of road surfaces 

Contact us today to find out more on FREE CALL: 1800 790 907 

Earthco Projects Location

3-7 Meek St New Gisborne Victoria 3438

Mon - Fri 9am to 3pm
Call us if urgent Pick Up required.

1800 790 907 Australia Only

Get directions