HOW TO USE QPR TO REPAIR ASPHALT
Whether you're repairing a pothole, utility cut, edgebreak or damaged asphalt, QPR Quality Pavement Repair is simple to use. It's ready to go straight from the bag or pail.
No prep work is required, and QPR can be used in extreme temperatures and weather conditions.
Potholes full of water? No worries. Just place QPR in your water-filled pothole following the instructions below, and you've got a strong and permanent repair.
Before you begin, roll the bag of QPR on the ground to soften the material for easy application.
If you're using a pail, bang the sides a couple of times before you take off the lid and up-end the pail. The material will loosen up with the help of a shovel.
Let's get started.
1. Simply clean the area to be repaired, removing loose debris.
2. Place QPR and spread evenly into the damaged area in 50mm layers. Use a tamp or shovel to spread the material.
3. Tamp with hand tamper or mechanical vibrator as required, then wheel roll or drive over the repair several times. Open to traffic immediately.
If you have questions or need a hand, contact us to get in touch.